Sump pumps are essential pieces of equipment that protect your basement from flooding during rainy seasons. Sump pumps are, therefore, designed to convey the flood water from your home to a safer drainage system farther away from your house. As a result, your basement will be free of water even during prolonged rainy seasons.
Currently, there are different types of sump pumps in the market which vary depending on the location of your home, the size of your house, and the susceptibility of your basement area to flooding.
Although the installation of sump pumps is a costly venture, the future benefits of the pumps far outweigh the initial expenses.
The article will highlight why sump pumps fail and how to reset a sump pump like an expert.
Factors That Cause Sump Pumps to Fail
Since the pumps are electro-mechanical devices, they develop problems which necessitate resetting. Some of the causes are:
1. Clogged Discharge Pipes-
If there is no clear path for water to flow out of your basement, the sump pump will not respond correctly.
2. Power Problems-
When there are sudden power surges across the motor terminals, some sump pumps are designed to stop working immediately to protect the motor circuit.
3. Improper Pump Installation-
If the flood water is overworking the electrical circuit of the pump, it will inhibit its regular operation.
4. Motor Switch Problems-
When the sump pump shifts in position in the sump basin, the motor switch can become ineffective, causing the motor to stop/run when it is not supposed to.
The above causes are among the main reasons that can prompt you to reset your sump pump. Before resetting a pump, it is crucial that you physically inspect the entire pumping system to ensure that the root cause of the pump failure is corrected before pressing the reset button on the motor.
The Resetting Procedure
The resetting procedure is a combination of easy-to-follow steps that are aimed at reviving your sump pump for operation.
1. Open up the sump pit to access the motor of the pump.
2. If you locate the reset button on the motor, press it and release it.
3. If the reset button is not present, turn the motor off from the electric socket outlet where the pump is connected.
4. Check the sump basin to remove any dirt or debris that could be preventing your sump pump from running.
5. Check the inlet and outlet pipes to make sure that they are clear without any blockages.
6. If the pump had a reset button, it should run now. If the pump has the on/off switch, turning the switch on should energize the motor to start operating again.
7. If the pump still cannot run, check the protective circuit breakers to make sure that they are in the on positions.
8. If after checking all the above the sump pump still fails to start, you should contact a technician to confirm the status of your main motor switch and the condition of the motor windings.
Given these points, it is vital to understand how to reset a sump pump and the main reasons that could cause your pump to fail. Furthermore, it is equally important to realize that resetting the sump pump is a series of corrective actions as opposed to pressing and releasing the reset button on the body of the motor.