As a car owner or an everyday driver, you should always ensure that the battery of your car is charged. Well-groomed car batteries quickly start the car engine and increase the overall performance of the vehicle.
A maximum charged car battery would save you from the troubles associated with the fact that the vehicle does not start, gets stuck somewhere, and with limited mobility.
However, without a faulty car charger and alternator, it seems impossible to maintain the power element of your car.
Fortunately, there are several ways to make this possible.
I will provide you with an innovative guide on how to charge a car battery without a real charger.
I'll also provide you with some tips and tricks to help you unconventionally change your car battery. Innovative skills that will keep your car's battery fully charged. You can always charge the battery with another car, but if you have no choice, this innovative way can do it.
However, you must be very careful if you decide to try these alternatives.
The basic concept and risks of the automatic battery charging process
Charging a car battery with a real charger is the safest and most effective way to do this. So the best and most popular alternative is to charge the power element with another car.
Keep in mind that this method is a "solution," an innovative improvisation that carries risks. This method is not recommended unless the situation requires it, and you have no other options.
The idea of this alternative method is to use any charger with the same voltage potential as a car charger. Then use some materials that you can usually find at home to create a home-made charger that you can use to charge your car's battery until it reaches its maximum electric capacity.
NOTE. If you decide to use this temporary method to charge your car battery, be sure to wear protective equipment and carry it out with extreme care.
Charging a car battery without a charger
If you plan to try this impromptu method, do not forget to give priority to your safety and be careful throughout the process. To perform this workaround, you must use a charger with the same voltage potential as a real charger.
It can be a laptop charger or any charger of an electronic device. As long as it has the correct voltage potential, it should be in order.
Let's say your car charger is powered by 12 volts; You can use any electronic charger that runs on 12 volts or more. This is done so that the battery of your car receives the necessary charge.
Once you have enough alternative chargers, you can create charging connections.
For these steps, you can check below.
Create a temporary charger to charge the battery
When creating an active charging connection, you should use some cables, electrical strips, wire strippers, and other essential tools. You should also be aware of the risks associated with the process and make sure that you have the right protective equipment.
Follow the instructions below:
Step 1: To model a charger for a real car battery, the first thing you need to do is create something that acts as its positive and negative pole. You can use two new wires and cut the rubber parts at both ends to expose the wire inside. Then form a circular loop with wires that you can use by twisting around the nodes of the power cell.
Step 2: For a temporary negative cable from your charging system, create loops at both ends of the cable. For one that will act as your positive wire, loop one end and leave other end as it is. To avoid confusion, you can label cables or use a color code to indicate their polarity.
Step 3: Using the negative cable, wrap the loop around the plug of the charger.
Pull the wire around the metal part of the assembly, and then seal it tightly with electrical tape.
Step 4: Then take the positive cable, try to make it bulky, and thicken the wires. Then apply some aluminum foil along the entire length of the wire. This will be a component of your charging system, which you plug into the opening of the charger (plug inserted into the outlet of the device).
NOTE. The structure should be like this: a small metal tube will have a positive cable inside, and then the negative circuit will hug it outside. You must also ensure that your positive cord is firmly compressed inside to avoid sparks.
At this point, you should have two ends of the wires. The free end is left with bare wires and the other end of the wire with two loops. These ends are the ones you will connect to the battery. Note that these two ends or cables should never touch or even intersect.
Step 5: Connect the loose and looped ends to the battery and make sure they are firmly attached to the battery terminals. Check all connections for malfunctions and prepare the nearest fire extinguisher. Then connect the power supply from the charger and start the charging process.
Frequently asked questions
Is it possible to completely discharge the battery?
Yes, a fully discharged battery can be charged in various ways, for example, when starting a car, using chargers or power plugs with inverters.
How to charge a car battery from an electrical outlet?
Yes, the use of inverters to convert AC to DC, which matches car batteries
Can I charge the battery in the car?
Yes, connecting the charger to the car and carrying out its work may take some time, depending on the capacity and technology of the charger.
How long does it take to charge a discharged car battery?
The charging speed depends on what result you want to get because fast charging can damage the battery cells, at best - long-term charging at low voltage, usually a standard car charger that provides 4-15 amperes, but in case of technical Maintenance on a 2-4; A low battery requires 24 hours to charge fully.
This is one of the smartest ways to charge your car's battery without a real charger. Keep in mind that this is a risky process, and be sure to wear appropriate protective equipment. This improvised and innovative way to charge a car battery is not recommended, and you can only use it if you have no options.